Non Asbestos Gasket

Non Asbestos Gasket Item No.

KXT-G1530

Description

Non-asbestos gaskets come in a variety of basic materials comprised of carbon, graphite, fiberglass, aramid fiber, Kevlar and other mineral fibers. The basic components of the non-asbestos materials used in gasket construction are elastomer and filler.Add special adhesives and a little packing into it, then roll and sulfurated. The elastomer composition corresponds to the application of the gasket, assisting in the categorization and selection of the gasket best used for the service it will be performing. It is a replacement of asbestos gasket.
Non-asbestos Gasket has better strength, elasticity.It has supper strong anti-penetrate performance. Non-asbestos Gasket is a better choice than asbestos gasket in high temperature and high pressure condition. And Non-asbestos Gasket is product using material with environment protection.

Typical Properties of Common Elastomers (Rubber Compounds)NBR - good for oils, gas, mild chemicals and waterSBR - good for saturated Steam, mild chemicals inert gas and waterNeoprene - good for saturated steam, refrigerants, oils, fuels, mild acids and alkalies and water.EPDM - good for saturated steam, mild chemicals and waterThe Process

Gaskets can be cut based on your drawing or sample of the gasket you desire. Basic I.D. x O.D. shapes can be cut by hand however most die cuts gaskets require a die.The size are according to API or DIN standard, also we can produce non-standard as clients' request.

Application

Non-asbestos Gasket are widely used in the industries such as gas, hydrocarbon, solvent, low pressure steam, weak acid and alkali etc.They are applied to some industries of food, mechanical, chemical engineering, petroleum and so on.

Main Specification of Non-asbestos Gasket

Pressure	3.5MPa
Temperature	=<350℃
Lateral Tensile Strength	8MPa
Compressibility	12%
Recovery	=<40%
Stress Relaxation	=<50%
Size	OD=<1500mm(special size can be made as request)